Mainshaft 3rd gear to suit all versions of the LT95 gearbox. Suits Perentie, 110 County and Range Rover Classic. If your LT95 gearbox has a third gear then this is the correct one. *** Specific Brand Part *** This product is not specific to one brand. If...

Machined billet aluminium bottom plate for the LT95 transfer case. Fits all versions of this gearbox. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Intermediate shaft for the taper bearing type intermediate cluster fitted to all Perentie models. Includes the rear dowel. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Steel threaded insert for the front of the LT95A intermediate shaft (accepts shaft bolt FTC5018 or AYG3388). This only suits the taper bearing type intermediate shaft found in the Perentie models. Comes with two dowels FRC9401. *** Specific Brand Part...

28 teeth high range output gear (fitted to the centre diff) as fitted to the RFSU/SRV Perentie variants. Also fitted to some Range Rover Classic. This gear is matched to FTC2012 to give a 1.228 ratio. *** Specific Brand Part *** This product is not...

Bare front output housing for the LT95 gearbox. DOES NOT include any bearings, seals or shafts. This is the housing the centre diff lock actuator bolts to. These housings will often crack if the transfer case is run out of oil OR someone has forgotten to...

Mainshaft 2nd gear for all LT95 gearboxes. Genuine Land Rover. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part...

Outer synchro member for the 1st/2nd synchro in all LT95 gearboxes. These are normally only available as part of the mainshaft assembly RTC2150, but we have a number of these available. *** Specific Brand Part *** This product is not specific to one...

Mainshaft bearing for the LT95 4-Speed gearbox. Suits all variants of the LT95 including Range Rover Classic, Perentie and 101FC. 2x per gearbox. Genuine RHP bearing. *** Specific Brand Part *** This product is not specific to one brand. If the product...