The UK fitted heater for all Series models – fitted to the back of the head (although we have seen some fitted to the FRONT of the head). HOWEVER some of the Australian built Series 3 had a different...

Top radiator hose for all Series 3 models with the 4 cylinder petrol or diesel engines. Same diameter at each end. *** Specific Brand Part *** This product is not specific to one brand. If the...

Will also suit some early Series 3 models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

Complete water pump AND thermostat kit for the 2.25l 4 Cylinder diesel and petrol engines.  Suits the 9-bolt water pumps (early versions had an eight bolt pump).  Suits most Series 2, 2A and 3 models...

Bottom radiator hose for most Series 2A 2.25l petrol or diesel models. Check your hose; there are some later models (particularly military) that used a different hose. *** Specific Brand Part ***...

Top radiator hose to suit Series IIA 4 Cylinder 2.25l Petrol models. Will also suit some early Series 3 as well. This hose has different diameters at each end. The later hose is the same diameter on...

Replacement heater tap for the Australian built Series 3 models.  This tap is mounted to the heater box itself.  If your heater tap is mounted to the head you will need 90577299. The cable mount on...

Aftermarket 82 degree thermostat to suit all Rover pushrod engines - 3.5 and 3.9. Suits Range Rover Classic, Discovery 1, 110 County V8. Replaces the 88 degree thermostat in the EFI models. ***...

Steel radiator cap (the "traditional" type) to suit 110 V8, and all Perentie 4x4 and 6x6. Also suits most Series vehicles. *** Specific Brand Part *** This product is not specific to one brand. If...

Steel radiator cap to suit all Perentie models. Also suits Range Rover Classic and 110 County *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...