Suits all versions of the LT95 gearbox. Also suits LT85, LT77 and the Td5 R380 where a cast lever is used. Bare lever; does not have the clip or nylon insert *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Clutch slave cylinder for all Td5 Defender and Td5 Discovery 2. We have also seen some late 300Tdi Defenders that use this slave cylinder (different thread to the earlier FTC5072) *** Specific Brand Part *** This product is not specific to one brand. If...

Clutch Release Bearing (aka Throwout Bearing) for all R380, LT77, LT85 and (V8 Only) LT95 gearboxes applications. Also supplied in all clutch kits. CANNOT be used in Perenties. *** Specific Brand Part *** This product is not specific to one brand. If the...

Throwout bearing (aka Clutch Release Bearing, Clutch Bearing) specifically for the LT95/Isuzu combination. For all other applications use FTC5200. This is the bearing we use in our 4-Spd clutch kit. You need to swap the 1" spacer over from the old...

Push rod clip for all models with a cast iron throwout lever - some Defender, 110, Perentie, Discovery 1 and Range Rover Classic (V8 only) and Discovery 2. Suits LT95, LT85 and LT77 (and R380 behind Td5 engines). *** Specific Brand Part *** This product...

The plastic C-clip used on all cast iron throwout levers for all LT95, LT85 and LT77 gearboxes. Also found on the R380 gearbox when fitted to the Td5 engine or Rover V8. DOES NOT suit the stamped steel lever normally found in the 300Tdi variants. ***...

Nylon insert for the cast iron clutch throwout lever found on all LT95, LT85 and LT77 gearboxes. Also found on the R380 gearbox when fitted to the Td5 engine or Rover V8. DOES NOT suit the stamped steel lever normally found in the 300Tdi variants.***...