Solve the warped pump cover problem for good. This was the military solution. You will also need the cover gasket 90571106.  Will suit any LT95 gearbox. *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Genuine Land Rover clutch aligning tool. Suits all clutch plates with the ¾" spigot bush, ie all Rover V8 clutches. Suits coarse and fine spline clutch plates (LT95, V8 LT77, LT85, V8 R380).< *** Specific Brand Part *** This product is not...

Suits all versions of the LT95 gearbox. Also suits LT85, LT77 and the Td5 R380 where a cast lever is used. Bare lever; does not have the clip or nylon insert *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Clutch Release Bearing (aka Throwout Bearing) for all R380, LT77, LT85 and (V8 Only) LT95 gearboxes applications. Also supplied in all clutch kits. CANNOT be used in Perenties. *** Specific Brand Part *** This product is not specific to one brand. If the...

Suits all Discovery 1 with the R380 gearbox. Suits all Defender 300Tdi with the R380 - NOTE - the very last of these (approx. '99) used a different slave cylinder FTC5202. *** Specific Brand Part *** This product is not specific to one brand. If the...

Throwout bearing (aka Clutch Release Bearing, Clutch Bearing) specifically for the LT95/Isuzu combination. For all other applications use FTC5200. This is the bearing we use in our 4-Spd clutch kit. You need to swap the 1" spacer over from the old...

Clutch driven plate for the 4-Speed (LT95) Isuzu powered Genuine Land Rovers, including all Perentie versions. For a complete clutch kit see KLR-CK4. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...