Light weight 5-Pipe allow rim in gloss black. Suits all Perentie and Defender models to 2016. Suits Discovery 1 and Range Rover Classic as well. 8x16" with a -15mm offset. Requires the alloy wheel nuts RRD500560. *** Specific Brand Part ***This product...

Mainshaft 3rd gear to suit all versions of the LT95 gearbox. Suits Perentie, 110 County and Range Rover Classic. If your LT95 gearbox has a third gear then this is the correct one. *** Specific Brand Part *** This product is not specific to one brand. If...

Genuine input shaft (primary pinion) for all LT95 gearboxes. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of...

Genuine LT95 layshaft - new.  Suits all versions of the LT95 gearbox. Also available as a military refurbished unit.  The reverse teeth have been cleaned up and re-shaped. Select your preferred option above (the price will change automatically)...

Suits all Rover type diffs with 10 – spline axles.  Range Rover Classic, Discovery 1, 110 County and early Defenders (front diffs only). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

Maxidrive replacement vacuum actuator for all LT95 gearboxes.  Suits the centre diff lock, and on all 6x6 models the third axle selector as well.  Australian made using a piston and o-ring, these units are easily rebuilt but will rarely wear...

Intermediate shaft for the taper bearing type intermediate cluster fitted to all Perentie models. Includes the rear dowel. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Overhaul kit to suit all versions of the LT230 Transfer Case. Includes all bearings, seals and nuts. Does not include gaskets (see RTC3890).(Later transfer cases usually do not require a gasket kit). *** Specific Brand Part *** This product is not...

Transfer gear for the rear of the mainshaft in the LT95 gearbox. Suits all variants of the LT95 and LT95A. This is the military spec one with the chain drive but will still fit gearboxes without a PTO. We recommend replacing the snap ring as well...

43 tooth High range gear for the LT95A gearbox. This is the ratio fitted to the RFSU/SRV variants of the Perentie. Will only fit the LT95A version with tapered bearings on the intermediate shaft assembly. Includes our own modification to ensure complete...

Genuine Land Rover mainshaft 1st gear for all LT95 gearboxes. These are a common failure point for the military LT95A gearbox. If you lose drive in 1st gear you have stripped the selector teeth off this gear. *** Specific Brand Part *** This product is...

Mainshaft 2nd gear for all LT95 gearboxes. Genuine Land Rover. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part...