Light weight 5-Pipe allow rim in gloss black. Suits all Perentie and Defender models to 2016. Suits Discovery 1 and Range Rover Classic as well. 8x16" with a -15mm offset. LIMITED STOCK!!!!!  But available for pre-order. Requires the alloy wheel...

Caster Correction front radius arm bush kit to suit Defenders and 110 (inc Perentie 4x4 and 6x6) and Range Rover Classic up to about '93. Also known as the "narrow" bush. Allows approximately three extra degrees of caster. Press fit. A good addition even...

RAPTOR 4x4 wide angle HEAVY DUTY front propshaft.  Fits the following: All Defender models from 2007 to 2016. Oversize uni-joints, oversize slipjoint and oversize tube. 690 - 805mm. Made in Italy. *** Specific Brand Part ***This product is not...

Genuine input shaft (primary pinion) for all LT95 gearboxes. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of...

RAPTOR 4x4 wide angle HEAVY DUTY front propshaft.  Fits the following: All Perentie models inc 6x6; All Defender models to 2006 (300Tdi, Td5); and All Discovery 1 (and corresponding Range Rover Classic).  Oversize uni-joints, oversize slipjoint...

Genuine LT95 layshaft - new.  Suits all versions of the LT95 gearbox. Also available as a military refurbished unit.  The reverse teeth have been cleaned up and re-shaped. Select your preferred option above (the price will change automatically)...

Suits all Rover type diffs with 10 – spline axles.  Range Rover Classic, Discovery 1, 110 County and early Defenders (front diffs only). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

Maxidrive replacement vacuum actuator for all LT95 gearboxes.  Suits the centre diff lock, and on all 6x6 models the third axle selector as well.  Australian made using a piston and o-ring, these units are easily rebuilt but will rarely wear...

Tubular lowered (-2") front shock mount (or turret). Direct bolt-in replacement for all Range Rover Classic, all Discovery 1, and all Defender/110 models including Perentie. *** Specific Brand Part *** This product is not specific to one brand. If the...

Overhaul kit to suit all versions of the LT230 Transfer Case. Includes all bearings, seals and nuts. Does not include gaskets (see RTC3890).(Later transfer cases usually do not require a gasket kit). *** Specific Brand Part *** This product is not...

Matched crownwheel and pinion set for all Rover 3.54 diffs(long nose type only). Suits Range Rover Classic, Discovery 1 and 2, and Defender/110 (front only). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Transfer gear for the rear of the mainshaft in the LT95 gearbox. Suits all variants of the LT95 and LT95A. This is the military spec one with the chain drive but will still fit gearboxes without a PTO. We recommend replacing the snap ring as well...

43 tooth High range gear for the LT95A gearbox. This is the ratio fitted to the RFSU/SRV variants of the Perentie. Will only fit the LT95A version with tapered bearings on the intermediate shaft assembly. Includes our own modification to ensure complete...

26 tooth high range output gear for the LT95 0.996 ratio. Suits Range Rover Classic, 110 and Perentie (including 6x6). DOES NOT suit the RFSU/SRV variants. This gear fits on the front of the centre diff. *** Specific Brand Part *** This product is not...