Mainshaft 3rd gear to suit all versions of the LT95 gearbox. Suits Perentie, 110 County and Range Rover Classic. If your LT95 gearbox has a third gear then this is the correct one. *** Specific Brand Part *** This product is not specific to one brand. If...

Genuine input shaft (primary pinion) for all LT95 gearboxes. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of...

Complete winch PTO driveline kit for the 6x6 Perentie models.�� Includes the three uni-joints, two shafts and all of the required grub screws, grease nipples and keys. Suits ONLY the 6x6 models.�� Does NOT include the centre support bearing or flange...

Genuine LT95 layshaft - new.  Suits all versions of the LT95 gearbox. Also available as a military refurbished unit.  The reverse teeth have been cleaned up and re-shaped. Select your preferred option above (the price will change automatically)...

Suits all 6x6 models with a PTO winch. Cable only; does not include the control lever or bracket. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

The intermediate cluster in the LT95 transfer case is the weak point of the whole gearbox.�� The taper bearings are a better set-up than the original roller bearings, but we still see A LOT of issues with this cluster.�� Most of the problems can be...

Suits all Perentie models. Also suits 110 County models. May also fit LT85 gearboxes?(with V8 or Isuzu engines). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

Complete torque limiter assembly for all 6x6 Perentie models. Includes the chain drive sprocket and selector hub. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

Maxidrive replacement vacuum actuator for all LT95 gearboxes.  Suits the centre diff lock, and on all 6x6 models the third axle selector as well.  Australian made using a piston and o-ring, these units are easily rebuilt but will rarely wear...

Intermediate shaft for the taper bearing type intermediate cluster fitted to all Perentie models. Includes the rear dowel. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

GENUINE LAND ROVER!!! Narrow gate gearstick assembly for the LT95A fitted to all Perentie models. Will also suit 110 County and Stage 1 and the later Range Rover Classic (roughly post '82). Available as either a BRAND NEW unit  or military...

LIMITED STOCK! -Centre diff lock control switch for all Perentie models including the 6x6. Suits all versions of the Perentie. This is the "Cross Country" switch in the centre of the dash.

Transfer gear for the rear of the mainshaft in the LT95 gearbox. Suits all variants of the LT95 and LT95A. This is the military spec one with the chain drive but will still fit gearboxes without a PTO. We recommend replacing the snap ring as well...

43 tooth High range gear for the LT95A gearbox. This is the ratio fitted to the RFSU/SRV variants of the Perentie. Will only fit the LT95A version with tapered bearings on the intermediate shaft assembly. Includes our own modification to ensure complete...

26 tooth high range output gear for the LT95 0.996 ratio. Suits Range Rover Classic, 110 and Perentie (including 6x6). DOES NOT suit the RFSU/SRV variants. This gear fits on the front of the centre diff. *** Specific Brand Part *** This product is not...