Rubber sealing ring for the oil cooler on the RHS of the 4BD1 (inside the aluminium cover). 2x per engine. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Preformed rubber rocker cover gasket to suit the cast alloy type as usually fitted to the naturally aspirated 4BD1 (4x4 Perentie). NOTE: The alloy rocker cover usually has a pressed steel acoustic cover over it making it look like a steel rocker cover...

Genuine Bosch diesel priming pump for the Isuzu 4BD1 engine. Suits all variants. Direct replacement for all previous types (including the leaky "pop-up" type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Diesel lift pump overhaul kit for the Zexel pump fitted to all Isuzu 4BD1 engines with in-line injection pumps. The lift pump runs off the side of the injection pump and draws diesel from the tank and pushes it through the fuel filter to the injection...

The rubber backed steel washer that seals the rocker cover nuts on the rocker cover for the 4BD1T engines. Only suits the pressed steel rocker covers; these will not fit the alloy rocker cover on the NA versions NOTE: These washers are fitted UNDER the...

Spigot bush to fit all Rover push-rod V8 engines (manual only)(3.5, 3.9, 4.0, 4.2 and 4.6). Also suits the 110 County with the LT95 or LT85 gearbox. Fits all Perentie models with the LT95 gearbox. This bush is supplied as part of our heavy duty clutch...