Genuine cylinder head gasket to suit all versions of the Isuzu 4BD1 and 4BD1T engines. Yes, it is the same gasket for the turbo motor. This gasket also comes in the Engine Gasket Kit 5878127055.*** Specific Brand Part *** This product is not specific...

Genuine steel exhaust manifold gasket used on the naturally aspirated and turbo versions of the 4BD1. Two required per engine. These are not used with the KLR turbo kit. *** Specific Brand Part *** This product is not specific to one brand. If the...

LIMITED STOCK!!! Genuine Isuzu complete engine gasket kit for the naturally aspirated 4BD1 engine. Includes head gasket, sump gasket (rubber type), timing case oil seal, injector washers, valve stem seals and all other gaskets. Can also be used on 4BD1T...

Left hand engine mount for all Isuzu 4BD1 engines fitted to Genuine Land Rovers including the 6x6. Genuine Isuzu. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

Genuine right hand engine mount for all Isuzu 4BD1 engines fitted to Genuine Land Rovers including the 6x6. Left hand mount is 5532150320 *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

See 5123190033K for the complete kit. This is the wear ring only that fits over the crankshaft journal. Will only suit the rear main oil seal 1096254391. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or...

Connecting Rod (Conrod) assembly for all 4BD1 engines (including turbo models). Sold as single units (four required for the 4BD1; six required for the 6BD1). Genuine Isuzu; comes with the little end bush already fitted. DOES NOT include the big end...

Rubber sealing ring for the oil cooler on the RHS of the 4BD1 (inside the aluminium cover). 2x per engine. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Preformed rubber rocker cover gasket to suit the cast alloy type as usually fitted to the naturally aspirated 4BD1 (4x4 Perentie). NOTE: The alloy rocker cover usually has a pressed steel acoustic cover over it making it look like a steel rocker cover...

Genuine Bosch diesel priming pump for the Isuzu 4BD1 engine. Suits all variants. Direct replacement for all previous types (including the leaky "pop-up" type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Diesel lift pump overhaul kit for the Zexel pump fitted to all Isuzu 4BD1 engines with in-line injection pumps. The lift pump runs off the side of the injection pump and draws diesel from the tank and pushes it through the fuel filter to the injection...

The rubber backed steel washer that seals the rocker cover nuts on the rocker cover for the 4BD1T engines. Only suits the pressed steel rocker covers; these will not fit the alloy rocker cover on the NA versions NOTE: These washers are fitted UNDER the...

Spigot bush to fit all Rover push-rod V8 engines (manual only)(3.5, 3.9, 4.0, 4.2 and 4.6). Also suits the 110 County with the LT95 or LT85 gearbox. Fits all Perentie models with the LT95 gearbox. This bush is supplied as part of our heavy duty clutch...