Locating Dowel, Flywheel Housing 4BD1 8x16mm

$4.40

8 x 16mm, 2x per engine. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more...

Add to Cart

Hose Clip, Vacuum Pump Oil Drain, 14mm

$4.18

*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more information, please see our Terms...

Add to Cart

Piston Oil Jet Banjo Check Bolt, 4BD1T

$20.79

Fitted to all factory turbo 4BD1T engines. Rumoured to also be fitted to the last of the NA engines as well, but we have never seen these in a military NA engine. *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Add to Cart

Engine Stop Motor Vinyl Cover

$46.20

*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more information, please see our Terms...

Add to Cart

Welch Plug, 4BD1 Cylinder Head

$6.05

4x per head. Suits all 4BD1 heads. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For...

Add to Cart

6x6 Perentie Oil Drain Pipe Gasket (Upper)

$6.16

*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more information, please see our Terms...

Add to Cart

4BD1T Turbo Coolant Adaptor

$7.70

Suits the free-float Garrett turbo fitted to the 6x6 Perentie. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part...

Add to Cart

4BD1 Sump Retaining Plate, LHR

$19.80

One of the four retaining plates fitted to the rubber mounted sumps on all military 4BD1 engines. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

Add to Cart

4BD1 Sump Retaining Plate, RHR

$19.80

One of the four retaining plates fitted to the rubber mounted sumps on all military 4BD1 engines. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

Add to Cart

4BD1 Valve Tappet/Cam Follower

$31.90

Suits all 4BD1 and 6BD1 engines. 8x or 12x per engine. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a...

Add to Cart

4BD1 Sump Retaining Plate, LHF

$19.80

One of the four retaining plates fitted to the rubber mounted sumps on all military 4BD1 engines. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

Add to Cart

4BD1 Sump Retaining Plate, RHF

$19.80

One of the four retaining plates fitted to the rubber mounted sumps on all military 4BD1 engines. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

Add to Cart

4BD1 Cylinder Head Dowel

$13.20

Suits all 4BD1 variants. 2X per engine. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand...

Add to Cart

Lift Pump Inlet Banjo Bolt

$10.12

This is the banjo bolt with the removable screen that often blocks up. Fitted to the inlet side of the lift pump on all 4BD1 variants. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

Add to Cart

4BD1 Throttle Spring Nylon Sleeve

$6.16

Fitted to the two throttle lever return springs. Located under the inlet manifold. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the...

Add to Cart

4BD1T Throttle Shaft Bush

$4.29

2 x per engine. Used on the shaft at the rear of the inlet manifold. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar...

Add to Cart

Injector Pipe Clamp, Single, 4BD1

$4.29

Usually used on No 4 injector pipe. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For...

Add to Cart

Pipe, Injector No. 3, 4BD1

$61.60

Suits naturally aspirated engines only. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand...

Add to Cart

4BD1 Flywheel Bolt

$13.75

6x per engine. Suits all versions of the military 4BD1. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a...

Add to Cart

Hose Adaptor, Coolant and Oil, 4BD1

$8.80

Used as either one of the heater hose outlets on the thermostat housing, or as the vacuum pump oil return fitting on the block. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Add to Cart

4BD1 Dipstick Tube O-Ring

$4.29

Suits all dipstick types, however some use two of these o-rings. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part...

Bolt, M8x75mm, Exhaust Manifold and Oil Spacer

$4.95

4x required for the NA 4BD1 exhaust manifold. Also 2x used for the oil feed spacer on the 6x6 turbo engine. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Add to Cart

4BD1 Governor Stop Screw, 35mm

$4.40

For the 6x6 Turbo engine injection pump. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand...

Add to Cart

4BD1 Fuel Injection Pump Side Cover Bolt

$5.39

2x per pump. Suits all in-line Zexel pumps used on the 4BD1. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of...

Add to Cart