Special washer for the crownwheel bolts for all Rover type diffs – 4.7 and 5.54 ratio. Suits Perentie, Defender, Range Rover Classic, Discovery 1 and 2, and Series models. *** Specific Brand Part *** This product is not specific to one brand. If...

Diff case stud fitted to the axle case. Suits front and rear of Range Rover Classic, Discovery 1 and 2. Suits front of all Perentie and Defender models to 2016. 3/8ÜNF x 1 ¼”. Usually two per diff, but some later cases use four of these...

Used for later model Radius arm and trailing arm bolts. Also suits the panhard rod bolts on Defenders ‘02>. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

Mud slinger plate to suit the pinion flange on all Rover type diffs (front and rear). Suits the fine spline type flange. Suits the following models: Defender to 2016 Perentie (front only) 110 County Range Rover Classic Discovery 1 Discovery 2 Freelander...

Flanged 12mm bolt to suit most Rover type diff pinions (with the fine spline). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same...

16mm ID panhard rod bush.  Suits all Defender models from 2002 to 2016.  Also suits all Discovery 2 and Range Rover P38 models.  Quality aftermarket replacement. *** Specific Brand Part ***This product is not specific to one brand. If the...

Suits any model Land Rover with 27mm (1 1/16”) wheel nuts. Also suits the spare wheel winches n all Perentie models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

A must have tool for DIY Land Rover mechanics.  The correct size (9/16") slimline socket especially designed for Land Rover propshaft nuts.  3/8" drive.  Can be used with impact tools. NOTE: LAND ROVER PROPSHAFT NUTS ARE NOT...

Suits P38 Range Rover and Discovery 2 models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different...

Inner convex washer for the rear upper shock absorber mount. Suits live-beam coil sprung Land Rover and Range Rover models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

1/4"UNF grease nipple to suit most propshaft unijoints and sliding joints. Suits many other applications - eg winch drive line. We use this grease nipple for removing the spigot bush adaptor from the 4BD1 crankshaft - you need to drill and tap a hole to...

Propshaft uni-joint. "Sigh". There are a lot of variations here, due mainly to the fact early and late propshafts can interchange on many Genuine Land Rover models. This uni joint SHOULD fit all Discovery 1, and all Defenders from approx. 1994 to 1999...

Rover diff pinion flange kit to suit fine spline diffs. Suits Disco 1, Disco 2 and late RRC (front and rear). Suits front diffs for all Defenders from approx. '92 on. This kit contains one flange, one pinion seal, one mud slinger, one nut and one bolt...

Suits front and rear Rover type diffs in Discovery 1, Discovery 2, and Range Rover Classic from approximately '92 on. Also suits front Rover diffs for Defenders from '92 on. Also suits front and rear diffs in the Range Rover P38A, and the rear diffs for...

The oft-abused propshaft nut. These days usually seen as a rounded off and burred lump of steel hidden by the uni-joint. These nuts used to be a 3/8"UNF nyloc nut, but years of abuse with metric spanners tends to round them off (a 15mm spanner will not...

Diff pinion oil seal to suit the "long nose" Rover diff as fitted to all Range Rover Classic (front and rear), all Discovery 1 and 2 (front and rear), all Defender front, all 110 and Perentie front. Also suits the front output seal for all LT95 gearboxes...

3/8"UNF propshaft bolt - used at the front and rear diff pinion flange. Suits all Range Rover Classic and P38A; all Defender, 110 and Perentie; all Discovery 1 and 2.*** Specific Brand Part *** This product is not specific to one brand. If the product...

Outer (small) diff pinion bearing for the Rover-type diff to front and rear of all Range Classic; all Discovery 1 and 2, all Defender/110/Perentie (front only). DOES NOT fit the P38A or rear Defender from approx. '02 on. *** Specific Brand Part *** This...

Inner (large) diff pinion bearing for the Rover-type diff to suit front and rear of all Range Classic; all Discovery 1 and 2, all Defender/110/Perentie (front only). DOES NOT fit the P38A or rear Defender from approx. '02 on. *** Specific Brand Part ***...