Single brake pipe clip (as in single pipe). Suits many models across the Land Rover range. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you...

Metric brake rotor bolt. 5 per rotor. Suits all Defender models to 2016, all Perentie models, all Discovery 1 models. Also suits Range Rover Classic, but it can be hard to pinpoint year models for these. Roughly 1989 onwards. *** Specific Brand Part ***...

Caliper bridge seal (between the two halves of the caliper).  Suits Range Rover and Discovery 1 calipers.  Suits rear calipers on Perentie 6x6 and RFSU models. *** Specific Brand Part *** This product is not specific to one brand. If the...

Suits 41mm pistons. Each kit will do 4 pistons. So you need one kit for each front caliper. And one kit for BOTH rear calipers. Each kit contains 4x seals, 4x wiper seals and 4x retaining rings. Suits the following models: All Perentie 4x4 and 6x6...

One of three parts for securing the handbrake expander unit. Also mounts the expander rod boot. Suits all handbrakes with an actuating rod (NOT the cable type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

One of three parts for securing the handbrake expander unit. Also mounts the expander rod boot. Suits all handbrakes with an actuating rod (NOT the cable type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

One of three parts for securing the handbrake expander unit. Also mounts the expander rod boot. Suits all handbrakes with an actuating rod (NOT the cable type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

8x20mm clevis pin used in various Land Rover handbrake lever/linkage applications.  20mm shank length. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Suits Perenties, Defenders and Range Rover Classic *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a...

Front caliper piston for all Perentie models. Also suits Defender front calipers. If your pistons measure 46mm diameter these pistons will fit. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

Handbrake adjuster assembly for Defender and Perentie handbrakes with the external cable bracket. This adjuster is the 1/2" square head type. If your handbrake cable goes directly into the backing plate this is NOT the correct adjuster. *** Specific...

Calliper bleed screw for Defender, Perentie, Disco 1, and Range Rover Classic. DOES NOT suit the wheel cylinders fitted to drum brakes. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

Brake pad spring kit to suit the rear calipers on al 6x6 Perentie and RFSU/SRV models. Also suits the front callipers for all Discovery 1 and Range Rover Classic (from approx '88)(with solid retention pins).Used with solid rentention pins RTC5001. DOES...

Suits NON-VENTED Discovery 1 and Defender front brakes. Suits rear brakes for 6x6 and RFSU/SRV Perentie models. DOES NOT suit early split-pin type callipers. Use with pad spring kit STC8576. *** Specific Brand Part *** This product is not specific to one...

Handbrake shoe kit to suit the LT230 Transfer case in the Defender up to approx. '92, may also suits earlier Discovery 1. Will also fit most Range Rover Classic with the LT230 transfer case. Fits most Perentie models (see below). The easy way to check...

Handbrake adjuster kit to suit all LT230 handbrakes with the direct-entry handbrake cable. Normally found in later Defenders and Discovery 1 (MA>), all Discovery 2, and later Range Classic. We have also seen some of these fitted to Perentie 4x4 and...

Handbrake shoe kit to suit the LT230 Transfer case in the Defender from approx. '92 on including Puma models, also suits all Discovery 2 and later Discovery 1. Also fits Range Rover P38A from '95 to '02. May also fit some Perentie models (see below). The...

Dust and mud boot fitted to FRONT of the handbrake backing plate. Suits LT95 and LT230 handbrakes with the indirect handbrake cable (this boots seals the actuating rod going into the backing plate). Suits Perentie, early Defender and 110, some Range...