Metric M8 retaining nut and clip for all Defender and Perentie radiator panels. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same...

Tailgate cable bracket for all High Capacity Pick Up bodies. Suits all Defenders with a HCPU rear tub to 2016. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Usually required when fitting a hard top to a Perentie. Suits most of the Series 3 and Defender (including Perentie) hardtops – but check the length of the “tubes”. Usually four per vehicle. *** Specific Brand Part *** This product is...

Used on most Defender models to 2016. Usually one on each side for the under-seat tool or battery boxes. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Foam seal fitted under the plastic grilles on the top of each front mudguard. Two per vehicle. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you...

Used in Defenders and Perenties to fix the front guards to the firewall. May be found in other applications.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Attaches tailgate cable BYC500070 (RRC5539) to the tailgate found on all Perente 4x4 GS models. Also suits Defender tailgates. This is the left hand bracket; you will also need the right hand one LR016686. *** Specific Brand Part *** This product is not...

Open grille to suit the right hand guard top on all Perentie models. Will also fit Defender models, but the grille is NOT blanked off. Genuine.

Outer windscreen seal for all 110/Defender hardtops (wagon, ute cab etc). Will also suit Perentie 4x4 hardtop conversions. You will also need the inner seal MTC4994 and the corner packers MUC6400 (x2). *** Specific Brand Part *** This product is not...

Inner windscreen seal for all 110/Defender hardtops (wagon, ute cab etc). Will also suit Perentie 4x4 hardtop conversions. You will also need the outer seal MTC6568 and the corner packers MUC6400 (x2). *** Specific Brand Part *** This product is not...

Corner packing seal between the top/side of the windscreen and the roof. Suits all 110/Perentie 4x4/Defender. DOES NOT suit 6x6 Perentie or soft top models. 2x required. *** Specific Brand Part *** This product is not specific to one brand. If the...

Black radiator grille to suit all 110/Defender/Perenties models. Does not include the Genuine Land Rover logo.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Fir tree type fasteners for the extended aircon nose in front of the radiator. These are usually found on the Puma models and some County 110 models. 8 required per vehicle.*** Specific Brand Part *** This product is not specific to one brand. If the...

The orange plastic "square" type insert for the floors and gearbox tunnels on most Defender and 110 models. Also used for the radiator grille. Accepts a No 14x3/4" self tapper (see AB614061L). *** Specific Brand Part *** This product is not specific to...

Right hand headlight surround for all 110 and Defender. This the plain black ones fitted to most. Can be fitted to Perenties to restore the "Defender" look.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows...

Left hand headlight surround for all 110 and Defender. This the plain black ones fitted to most. Can be fitted to Perenties to restore the "Defender" look.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows...

The original plastic two-piece rivet for fixing the wheel arch flares to the inner guard on all 110/Defender models. 8 per front flare required, 12 per rear flare. An alternative to using these is to fit rivnuts and screws as a stronger fix. *** Specific...

Self tapping screw to suit the orange plastic inserts for Defender floors and gearbox tunnel. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you...