Suits the "rectangular" plastic expansion tank for all Tdi Defenders and Disco 1; also suits V8 Disco 1 and later RRC. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

The name says it all.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more information,...

Gasket for ERR7097. Fitted to all Td5 engines *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different...

Main drive belt (or ancillary drive belt) for the Td5 Defender fitted with the Australian aircon kit. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Suits all models with or without aircon.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand...

The name says it all.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more information,...

Small o-ring for the engine oil cooler pipes found on 200 and 300Tdi Defender and Discovery. Also suits the same on the 3.5, 3.9, 4.0 and 4.6 Rover V8 in Range Rover Classic, P38A, Discovery 1 and 2. Also fits some Freelander models. *** Specific Brand...

Coolant outlet flange for all Td5 engines. Bolted to the front left hand side of the head. The top radiator hose fits to this outlet. It is VERY common for these to corrode away. Fitted with gasket LVJ000010. *** Specific Brand Part *** This product is...

If you remove the water pump bracket on the Td5 you need to replace this o-ring.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same...

The large fan support bearing in the timing case of the Td5. Special tools are required to replace this bearing. If this bearing is noisy or has any freeplay it needs to be replaced immediately. If it starts to seize it will destroy the timing case. This...

The automatic fan (or ancillary) belt tensioner on the 300Tdi engine. When these start to wear they can "cock" sideways forcing the side of the belt against the side of the pullies. This is what usually creates the usual 300Tdi belt noise. We suggest...

Serpentine fan or ancillary drive belt to suit all 300Tdi engines with a (approx.) 65mm alternator pulley (usually up to 1997). If you have a smaller alternator pulley you need belt number ERR5911. *** Specific Brand Part *** This product is not specific...

Two heater hoses to suit the 300Tdi Defender - BTR6164 and BTR6165. Sold as a pair.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the...