The pedal assist spring kit fitted to Genuine Land Rover Defender from about 1992 onwards. This will not fit the Perentie or 110 clutch pedal. Includes the return spring and the two plastic locating inserts. *** Specific Brand Part *** This product is...

Modified throwout bearing as fitted to the Isuzu powered Genuine Land Rovers with the LT95 gearbox. We recommend using FRC9568 and swapping the spacer from the old bearing. This is included in the clutch kit KLR-CK. *** Specific Brand Part *** This...

Clutch slave cylinder to suit Defender 200Tdi fitted with LT77 gearbox. Also suits Series III models.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Push rod clip for all models with a cast iron throwout lever - some Defender, 110, Perentie, Discovery 1 and Range Rover Classic (V8 only) and Discovery 2. Suits LT95, LT85 and LT77 (and R380 behind Td5 engines). *** Specific Brand Part *** This product...

The plastic C-clip used on all cast iron throwout levers for all LT95, LT85 and LT77 gearboxes. Also found on the R380 gearbox when fitted to the Td5 engine or Rover V8. DOES NOT suit the stamped steel lever normally found in the 300Tdi variants. ***...

Nylon insert for the cast iron clutch throwout lever found on all LT95, LT85 and LT77 gearboxes. Also found on the R380 gearbox when fitted to the Td5 engine or Rover V8. DOES NOT suit the stamped steel lever normally found in the 300Tdi variants.***...

Spigot bush to fit all Rover push-rod V8 engines (manual only)(3.5, 3.9, 4.0, 4.2 and 4.6). Also suits the 110 County with the LT95 or LT85 gearbox. Fits all Perentie models with the LT95 gearbox. This bush is supplied as part of our heavy duty clutch...