Used in multiple applications across the Land Rover range. A very useful grommet for any electrical work involving passing through body panels. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

Electronic direct fit speedo for all Defender and Perentie models (to replace a mechanical speedo). Reads 0-120kph (ignore the photo). Also requires a speed sensor YBE100530. DOES NOT include a wiring harness – you will need to make this yourself...

Secures the internal (usually) grey trim facia over the dash vents. Suits all Perentie and Defender models to 2002. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

Bonnet prop clip for all Defenders from ‘99 to ‘16. Stows the prop across the top of the radiator when it is not in use. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

Suits all LT230 and LT95 transfer cases with mechanical speedo cables. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or...

Suits all Perentie models. Will also suit most early Defender models. Check part numbers. VERY LIMITED STOCK!!!! *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

Usually found in later side indicators.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For...

Usually used in the Perentie 4x4 and Defender battery box under the passenger seat. Suits both battery cables. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Wiring grommet to suit a 27mm hole. Used in various locations and applications across the Perentie and Land Rover range. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

Used in various locations and applications across the Perentie range. Accepts any 4 or 5 pin relay. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Plastic cover for where the wiring harness exits into the engine bay. Located behind the air cleaner on the Perentie. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

Rubber wiring grommet used in various applications across the Perentie range. 14mm hole size, with a through hole of approximately 4mm. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

Rubber wiring grommet used in various applications across the Perentie range. 16mm hole size, with a through hole of approximately 5mm. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

Insulated M6 nylon nut for the red and black auxillary power outlets found on earlier Land Rover and Range Rover dashes. Also suits all Perentie models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or...

Fitted to the Td5 and Puma Defenders (in place of a speedo cable) to suit the factory fitted electronic speedo. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

Fuse box cover screws for all Defenders, all 110 and all Perentie models. These are the original screws with the plastic knobs. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

RHD instrument panel (speedo etc) for Defender and 110. Suits 4x4 Perentie. Does not suit the Td5 models with immobiliser LED. Original black plastic. Another option is to fit the Raptor steel replacement binnacle - see R062. *** Specific Brand Part ***...

The panel behind the instrument binnacle on all Defenders up to 2006 (NOT Puma models). This is the panel that supports the instrument binnacle. It breaks. Often. Fit a steel one instead R051. *** Specific Brand Part *** This product is not specific to...

The orange plastic "square" type insert for the floors and gearbox tunnels on most Defender and 110 models. Also used for the radiator grille. Accepts a No 14x3/4" self tapper (see AB614061L). *** Specific Brand Part *** This product is not specific to...