*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more information, please see our Terms...

RAPTOR 4x4 wide angle HEAVY DUTY front propshaft.  Fits the following: All Perentie models inc 6x6; All Defender models to 2006 (300Tdi, Td5); and All Discovery 1 (and corresponding Range Rover Classic).  Oversize uni-joints, oversize slipjoint...

Suits any model Land Rover with 27mm (1 1/16”) wheel nuts. Also suits the spare wheel winches n all Perentie models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

All the electrical power in the world is no good without a decent connector.  And for rough off-road conditions the humble cigarette lighter plug simply doesn't cut it.  You need a simple and reliable connector to make sure your fridge stays...

All the electrical power in the world is no good without a decent connector.  And for rough off-road conditions the humble cigarette lighter plug simply doesn't cut it.  You need a simple and reliable connector to make sure your fridge stays...

The REDARC Smart Start SBI12 100A is a 12V DC 100A microprocessor-controlled, dual battery isolator designed to protect the start battery from excessive discharge while allowing the auxiliary battery to supply charge to non-essential loads. If you own...

A must have tool for DIY Land Rover mechanics.  The correct size (9/16") slimline socket especially designed for Land Rover propshaft nuts.  3/8" drive.  Can be used with impact tools. NOTE: LAND ROVER PROPSHAFT NUTS ARE NOT...

Bracket only. For a complete kit see JYG0482. Will also fit Defenders. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or...

The KLR-7167 Superflex rear springs are a progressive rate, taper-wound, long travel game changer for your Land Rover.  Suitable for all 4x4 Perenties and any Defender or 110 except the 90 models, these springs are only available from KLR and...

The KLR-4177 Superflex front springs are a progressive rate, taper-wound, long travel game changer for your Land Rover.  Suitable for all 4x4 Perenties and any Defender or 110 except the 90 models, these springs are only available from KLR and...

Suits 110 County (non-aircon only), Perentie and Defender to WA. Straight hose connections (these point across to the drivers side). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

The Terrafirma Snow Cowl is made in the UK by an expert plastics moulding company, and is based on the military Snow Cowl Application. This all weather accessory helps to prevent Snow, Mud, Leaves and Sand entering the heater in take and...

The original optional equipment folding side step for all Defender and 110/90 models. Can be fitted to either side to allow easier access. Will also fit Perentie 4x4 models. Installation is very easy. Generally not compatible with any other side steps or...

Rear heavy duty axle set for Defender with the P38A diff and factory fitted disc brakes (from approx. '02 to current). These axles are 10mm longer and MUST be fitted with drive flanges MDE859X. *** Specific Brand Part *** This product is not specific to...

Nominal 2" raised front spring for all Defender models from 1991 on. Suits 200/300Tdi, Td5 and Puma models.  Will also suit the front of a diesel Discovery 1 with a bullbar and winch.   A good all-round option for the front of any of these...

Rear King springs for Defender or Perentie 4x4 with a consistently higher tare weight (nominally 300kg above standard tare). Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring.  Good match for...

Rear King springs for Defender 110 to 2016 or Perentie 4x4. Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring but slightly heavier.  Good match for a Defender 110 station wagon loaded for...

The proper tool for undoing , adjusting and tensioning Genuine Land Rover wheel bearings. A cold chisel IS NOT a suitable replacement for this tool. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...