Front inner axle seal for all Series models. One per side. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a...

Front inner axle bearing for all Series 2, 2A and 3 models. Fits in the rear of the swivel ball. Two per vehicle. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

Side carrier bearing for all Series models diff centres. Also suits early Range Rover Classic. Supplied in a name brand quality – Timken, NTN or Koyo. Two required per diff. *** Specific Brand Part *** This product is not specific to one brand. If...

Special washer for the crownwheel bolts for all Rover type diffs – 4.7 and 5.54 ratio. Suits Perentie, Defender, Range Rover Classic, Discovery 1 and 2, and Series models. *** Specific Brand Part *** This product is not specific to one brand. If...

Double ended wheel nut for all Series 1, 2 and 2A models. Takes a 15/16” socket. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with...

Diff case stud fitted to the axle case. Suits front and rear of Range Rover Classic, Discovery 1 and 2. Suits front of all Perentie and Defender models to 2016. 3/8ÜNF x 1 ¼”. Usually two per diff, but some later cases use four of these...

Castellated nut for all Rover type diff pinions. Suits all Series models, early Range Rover Classic and still sometimes found in Perentie models as well. Also suits the end of the axle shafts on all Series models. *** Specific Brand Part *** This product...

Quality aftermarket wheel bearing kit to suit MANY Land Rover models. Includes two bearings, one hub seal (grease type), drive flange gasket, two types of hub nuts and lock washer. One kit required per wheel. Suits the following: Range Rover Classic (all...

Suits all Series models. Also suits Perentie and Defender models (to approx. ‘95). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with...

Inner wheel bearing for all Series models where the wheel bearings were two different sizes. Branded either Koyo or Timken.There was a change point around 1980; Land Rover adopted the same size bearings in each hub. *** Specific Brand Part *** This...

Suits upper and lower front shock absorbers and suits lower rear shock absorbers for the following: Defender to approx 1998 All Perentie models All Discovery 1 models (front only) All Range Rover Classic models (not rear after ‘92) *** Specific...

Standard military 16x6" rim (21mm offset).  Tubed only (not rated for tubeless applications).  Suits all Perentie models, and all military trailers that use the Land Rover wheel.  If you want a spare for your No 5 or Haulmark trailer then...

Yes they come Genuine in bare metal. Suits all 4x4 Perenties and Defenders with the rear Salsibury diff. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Suits all Series vehicles to 1981 (approx.) *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand...

Suits any model Land Rover with 27mm (1 1/16”) wheel nuts. Also suits the spare wheel winches n all Perentie models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Wheel bearing kit to suit MANY Land Rover models. Includes two Timken bearings, one Corteco hub seal, drive flange gasket and three lock washers. One kit required per wheel. Suits the following:Range Rover Classic (all models)Series 3 Stage One110...

The proper tool for undoing , adjusting and tensioning Genuine Land Rover wheel bearings. A cold chisel IS NOT a suitable replacement for this tool. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...