Suits all rear brakes for all Discovery 2 and P38A Range Rover models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or...

Suits front and rear Rover type diffs in Discovery 1, Discovery 2, and Range Rover Classic from approximately '92 on. Also suits front Rover diffs for Defenders from '92 on. Also suits front and rear diffs in the Range Rover P38A, and the rear diffs for...

Nyloc nut to suit the chassis end of the front and rear trailing arms/radius arms. Suits RRC from '86, all Disco 1, all Defender/110 and 6x6. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

Suits front of all Range Rover P38A models from '95 to '02.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a...

Will suits all versions of the Rover push-rod V8 - 3.5, 3.9, 4.0, 4.2 and 4.6. Will replace the original cork gaskets. Suits RRC, 110 County, Discovery 1 and 2 and Range Rover P38A.*** Specific Brand Part *** This product is not specific to one brand...

Flat panel air filter for all Td5 engines in Discovery 2 and Defender. Also fits KV6 Freelander and later Range Rover P38A V8. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Handbrake shoe kit to suit the LT230 Transfer case in the Defender from approx. '92 on including Puma models, also suits all Discovery 2 and later Discovery 1. Also fits Range Rover P38A from '95 to '02. May also fit some Perentie models (see below). The...

This double-lip viton oil seal replaces the LT95 rear output seal 90622240. Also suits the front and rear output for any LT230 transfer case.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

Diff pinion oil seal for the "short nose" Rover diff. Fitted to the rear of the late Td5 and the Puma Defenders, and front and rear of the Range Rover P38A.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows...

Dowel ring for a number of Genuine Land Rover engines. Usually used between the engine block and flywheel housing. Also used on the front of the LT230 transfer case. This dowel is hole, and measures 15.0mm on the outside diameter.*** Specific Brand...

Small diameter inline fuel filter for all Discovery 1 V8 models, and the later Range Rover Classic models. Also fits Range Rover P38A V8 petrol models. This filter has screw in fittings; if yours has hose clamps use STC1677 *** Specific Brand Part ***...

Genuine Land Rover (ignore the photo) engine oil filter to suit all push rod Rover V8 (3.5, 3.9, 4.2, 4.6) engines in Range Rover Classic and P38A, Discovery 1 and 2 and 110 County. Also fits all Tdi engines in Discovery 1 and Defender. *** Specific...

Two-hole thermostat cover gasket for all Rover push-rod V8 engines - 3.5, 3.9, 4.0, 4.2 and 4.6. Multi-layered with steel insert*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Diff filler and drain plug for many, many Genuine Land Rover models. This is the taper BSP thread type that accepts a standard 1/2" drive ratchet/breaker bar. Also suits LT230 transfer cases. This one DOES NOT have a magnet. *** Specific Brand Part ***...