The "Bar, Tie, Bent Forging" (Genuine Land Rover's words, not ours) from the bottom of the steering box to the panhard rod mount. The early ones had slots instead of holes. These often break; the later one has holes and has proven to be much stronger...

M14 bolt for either end of the panhard rod on all 110/Defender/Perentie/Discovery 1 and later Range Rover Classic. Suits the ANR3410 panhard bush. On older vehicles in particular these usually need to be replaced when the bushes are replaced. Any wear on...

BACK IN STOCK!!!! Bilstein steering damper to suit all Defender models, all 110 County models, and all Perentie 4x4 and 6x6 models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists...

Genuine Land Rover panhard rod bush. Suits all 110/Defender and Perenties. Also suits all Discovery 1 and all Range rover Classic from approximately 1984 on. This is the genuine Land Rover bush; no other brand appears to be worth fitting, particularly in...

Chassis end steering damper bush for all Defender/110/Perentie. 2x per vehicle. Will also suit most aftermarket steering dampers.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Shock absorber bush for 110/Defender/RRC and Disco 1. Fit front shocks upper and lower and rear shocks lower. Note: On the later models your rear axle may have cups welded to the lower shock mount. If it does you need shock bushes part number RNF100090L...