Upper a-frame to chassis nut (3/4"UNF) for Range Rover Classic, Discovery 1, 110 County, Defender and 4x4 Perentie. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

Suits various suspension bolts on Genuine Land Rovers. Usually suits front radius arm bolts and rear trailing arm lower bolts *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Nyloc nut to suit the chassis end of the front and rear trailing arms/radius arms. Suits RRC from '86, all Disco 1, all Defender/110 and 6x6. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

The stepped sway bar link bolt for the front and rear anti-roll bar. Connects the ball joint link to the sway bar with the rubber bushes 552819. Suits Defender, 110, Discovery 1 and Range Rover Classic.  Also suits the front and rear sway bar links...

Narrow front radius arm bush for Defenders and 110 (inc Perentie 4x4 and 6x6) up to about '93. This is the 2-Tube type listed in most parts catalogues. We actually recommend using NTC1774 (a 3-tube type)for this application. These two numbers are...

The sway bar/anti-roll bar link as fitted to Defender, 110, some Perentie, Disco 1, RRC. One end of this link looks like a tie-rod end. Two per axle, and these are the same front and rear. Comes with two rubber bushes 552819 per link. *** Specific Brand...

Narrow front radius arm bush for Defenders and 110 (inc Perentie 4x4 and 6x6) up to about '93. This is the original 3-Tube type that lasts longer. Most parts catalogues specify NTC7307 (a 2-tube type). These two numbers are interchangeable. NTC7307 is...

OE Metalastik type bush for the rear upper a-frame to chassis mount. Suits the rear of all Range Rover Classic, all Discovery 1, all Defenders, and all 110 models including 4x4 Perentie. The old bushes must be pressed out and these new ones pressed in...

Original style rubber/steel bush for the diff end of the rear trailing arm. Suits most coil sprung Genuine Land Rovers - RRC, Disco 1, Defender, 110 and Perentie 4x4. *** Specific Brand Part *** This product is not specific to one brand. If the product...

Cup type shock absorber guide washer. Normally fitted to the top and bottom of the front shocks in all Defenders/110, Discovery 1, Range Rover Classic and Perenties. These are often supplied with various shock absorbers, but not always. *** Specific...

Rear King springs for Defender 110 to 2016 or Perentie 4x4. Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring but slightly heavier.  Good match for a Defender 110 station wagon loaded for...

Upper a-frame to chassis bolts for Range Rover Classic, Discovery 1, 110 County, Defender and 4x4 Perentie. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Replacement bolt for the NTC1772 bush on the rear of most coil sprung/live-beam axle Genuine Land Rovers. Connects the rear trailing arm to the rear diff. 2x per vehicle. These often end up with a shoulder worn into them from coming loose. Check the...

Aftermarket rubber bush for the rear of the front radius arm for all TD5 and Puma Defenders. We recommend using TF1003 for this application. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

Genuine Land Rover panhard rod bush. Suits all 110/Defender and Perenties. Also suits all Discovery 1 and all Range rover Classic from approximately 1984 on. This is the genuine Land Rover bush; no other brand appears to be worth fitting, particularly in...

Shock absorber bush for 110/Defender/RRC and Disco 1. Fit front shocks upper and lower and rear shocks lower. Note: On the later models your rear axle may have cups welded to the lower shock mount. If it does you need shock bushes part number RNF100090L...

Two long bolts to secure the a-frame ball joint assembly to the rear a-frame arms (just above the rear diff). Suits Range Rover Classic, Discovery 1, 110 County, Defender and 4x4 Perentie. The nuts for these bolts are 1/2"UNF  - see NY608042...