Genuine input shaft (primary pinion) for all LT95 gearboxes. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of...

Complete winch PTO driveline kit for the 6x6 Perentie models.�� Includes the three uni-joints, two shafts and all of the required grub screws, grease nipples and keys. Suits ONLY the 6x6 models.�� Does NOT include the centre support bearing or flange...

Genuine LT95 layshaft - new.  Suits all versions of the LT95 gearbox. Also available as a military refurbished unit.  The reverse teeth have been cleaned up and re-shaped. Select your preferred option above (the price will change automatically)...

Suits all 6x6 models with a PTO winch. Cable only; does not include the control lever or bracket. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

An often neglected part of your vehicle - until you need it! 11.0mm wire rope (45 metres) with recovery hook. Suits all of the 6x6 Perentie models with winches. *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Complete torque limiter assembly for all 6x6 Perentie models. Includes the chain drive sprocket and selector hub. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

Maxidrive replacement vacuum actuator for all LT95 gearboxes.  Suits the centre diff lock, and on all 6x6 models the third axle selector as well.  Australian made using a piston and o-ring, these units are easily rebuilt but will rarely wear...

Taper bearing type input/selector gear for the LT95A gearboxes (Perentie 4x4 and 6x6). This gear sits in the middle of the intermediate cluster. Includes the sliding selector member. *** Specific Brand Part *** This product is not specific to one brand...

43 tooth High range gear for the LT95A gearbox. This is the ratio fitted to the RFSU/SRV variants of the Perentie. Will only fit the LT95A version with tapered bearings on the intermediate shaft assembly. Includes our own modification to ensure complete...

Intermediate shaft high range gear with 45 teeth for the military LT95 gearbox with our own modification to ensure complete engagement. Suits tapered bearings fitted to the LT95A variants in the 4x4 and 6x6 Perentie. If your Perentie jumps out of high...