Perentie 6x6 clutch pipe from master cylinder to clutch hose. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of...

Clutch master cylinder to suit all Series 3, Defender/110 and all Perentie models. These do fail over time, and should be replaced by a good quality name-brand unit. We use PBR or TRW (as supplied here). There are plenty of cheap ones out there; we...

Throwout bearing (aka Clutch Release Bearing, Clutch Bearing) specifically for the LT95/Isuzu combination. For all other applications use FTC5200. This is the bearing we use in our 4-Spd clutch kit. You need to swap the 1" spacer over from the old...

Clutch push rod to suit the Isuzu-LT95 as fitted to all Perenties and diesel County 110*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with...

Clutch pipe for the slave cylinder on the Perentie and Isuzu powered 110 County. You may also need the clutch hose NRC2211 *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...