Clutch pedal box to suit all Perentie models. Will also suit 110 County. Will fit later Defender models, but does not have the provision for the assist spring.*** Specific Brand Part *** This product is not specific to one brand. If the product photo...

Genuine Land Rover clutch aligning tool. Suits all clutch plates with the ¾" spigot bush, ie all Rover V8 clutches. Suits coarse and fine spline clutch plates (LT95, V8 LT77, LT85, V8 R380).< *** Specific Brand Part *** This product is not...

Clutch pipe for Perentie 4x4; also suits 110 V8 and Diesel models. This pipe runs from the clutch master cylinder across the firewall and down to the clutch hose. This is required if you are converting a Tdi Defender to the 4BD1.*** Specific Brand Part...

Clutch slave cylinder for the Isuzu powered LT95 (and LT85 5 speed) gearbox. Suits the 4x4 and 6x6 Perentie and the civilian 110 County. Also suits Defender V8 with LT77 gearbox. Also suits the KLR R380 5 speed conversion for the 4BD1 engine. AP brand as...

Modified spigot bush adaptor to fit the rear of the 4BD1 or 4BD1T crankshaft. Will accept the Tdi spigot bush (22mm) for use with a R380 gearbox from a 300Tdi Defender. Comes with a spigot bush fitted.*** Specific Brand Part *** This product is not...

Original spigot bush adaptor fitted to the Isuzu powered Genuine Land Rovers with either the LT95 or LT85 gearboxes. This is also fitted to all of the Perentie variants. 3/4" internal diameter. Comes with a spigot bush fitted. *** Specific Brand Part ***...