Suits all Perentie and most Defender models. Fitted behind the vertical face of the seat base (behind the handbrake lever). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

Normally used on Defender and Perentie handbrake cables. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a...

Handbrake cable link lever for early Defender and Perentie handbrakes. Suits those models with the indirect cable linkage. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

One of three parts for securing the handbrake expander unit. Also mounts the expander rod boot. Suits all handbrakes with an actuating rod (NOT the cable type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

One of three parts for securing the handbrake expander unit. Also mounts the expander rod boot. Suits all handbrakes with an actuating rod (NOT the cable type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

One of three parts for securing the handbrake expander unit. Also mounts the expander rod boot. Suits all handbrakes with an actuating rod (NOT the cable type). *** Specific Brand Part *** This product is not specific to one brand. If the product photo...

8x20mm clevis pin used in various Land Rover handbrake lever/linkage applications.  20mm shank length. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Handbrake pivot lever pin for 110 and all Perentie models. Only on models with the lever bracket on the side of the LT95 gearbox.  Measure 8mm diameter by 50mm long.  Secured with a small split pin. This product is not specific to one brand...

Handbrake adjuster assembly for Defender and Perentie handbrakes with the external cable bracket. This adjuster is the 1/2" square head type. If your handbrake cable goes directly into the backing plate this is NOT the correct adjuster. *** Specific...

Direct entry handbrake cable for all Defenders from approx. '92 on. Also fitted to some Perentie models. You need to check your existing handbrake cable. If it attaches directly to the handbrake backing plate this is the correct cable for you. If it...

Handbrake cable to suit Perentie and Defender up to approx. '93. This one uses a clevis pin to attach to a bracket on the transfer case. Suits LT95 and LT230. If your handbrake cable fits directly to the handbrake backing plate you need SPB500200. Some...

Rubber handbrake boot that over the lever inside the cab. Suits all Defenders, all Perenties and all 110 County models.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

Handbrake adjuster kit to suit all LT230 handbrakes with the direct-entry handbrake cable. Normally found in later Defenders and Discovery 1 (MA>), all Discovery 2, and later Range Classic. We have also seen some of these fitted to Perentie 4x4 and...

Handbrake shoe kit to suit the LT230 Transfer case in the Defender from approx. '92 on including Puma models, also suits all Discovery 2 and later Discovery 1. Also fits Range Rover P38A from '95 to '02. May also fit some Perentie models (see below). The...

Handbrake shoe return springs for all Perentie LT95 handbrakes; also fits LT230 variants with an indirect handbrake cable. NOTE: These springs are fitted vertically; if yours are horizontal these will not fit.*** Specific Brand Part *** This product is...

Handbrake warning light switch fitted to the handbrake lever on the following models: all Defender, all 110 County, all Perentie models, all Discovery 1, all Range Rover Classic from approx. 1985. This switch is fitted with two small screws; early Range...

Complete handbrake expander assembly for all Perentie models, all 110 County and all Defenders up to approximately 1992. Also suits early Discovery 1 and Range Rover Classic with the LT230 or Borg Warner transfer cases. This expander suits the military...

Dust and mud boot fitted to FRONT of the handbrake backing plate. Suits LT95 and LT230 handbrakes with the indirect handbrake cable (this boots seals the actuating rod going into the backing plate). Suits Perentie, early Defender and 110, some Range...