Special washer for the crownwheel bolts for all Rover type diffs – 4.7 and 5.54 ratio. Suits Perentie, Defender, Range Rover Classic, Discovery 1 and 2, and Series models. *** Specific Brand Part *** This product is not specific to one brand. If...

Diff case stud fitted to the axle case. Suits front and rear of Range Rover Classic, Discovery 1 and 2. Suits front of all Perentie and Defender models to 2016. 3/8ÜNF x 1 ¼”. Usually two per diff, but some later cases use four of these...

Used for later model Radius arm and trailing arm bolts. Also suits the panhard rod bolts on Defenders ‘02>. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...

Mud slinger plate to suit the pinion flange on all Rover type diffs (front and rear). Suits the fine spline type flange. Suits the following models: Defender to 2016 Perentie (front only) 110 County Range Rover Classic Discovery 1 Discovery 2 Freelander...

Flanged 12mm bolt to suit most Rover type diff pinions (with the fine spline). *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same...

Suits P38 Range Rover and Discovery 2 models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different...

Inner convex washer for the rear upper shock absorber mount. Suits live-beam coil sprung Land Rover and Range Rover models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

1/4"UNF grease nipple to suit most propshaft unijoints and sliding joints. Suits many other applications - eg winch drive line. We use this grease nipple for removing the spigot bush adaptor from the 4BD1 crankshaft - you need to drill and tap a hole to...

The oft-abused propshaft nut. These days usually seen as a rounded off and burred lump of steel hidden by the uni-joint. These nuts used to be a 3/8"UNF nyloc nut, but years of abuse with metric spanners tends to round them off (a 15mm spanner will not...

Diff pinion oil seal to suit the "long nose" Rover diff as fitted to all Range Rover Classic (front and rear), all Discovery 1 and 2 (front and rear), all Defender front, all 110 and Perentie front. Also suits the front output seal for all LT95 gearboxes...

3/8"UNF propshaft bolt - used at the front and rear diff pinion flange. Suits all Range Rover Classic and P38A; all Defender, 110 and Perentie; all Discovery 1 and 2.*** Specific Brand Part *** This product is not specific to one brand. If the product...