Used in multiple locations for the 8mm fuel pipes on all Perentie models. Also suits many other Land Rover models; if your fuel line is 8mm then this clip will suit. Usually used along the top of the chassis rail but also seen on some body parts. ***...

Plastic drain plug for the sedimentors fitted to all Perentie models and all 200/300Tdi models.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you...

Suits the diesel sedimentor on all Perentie models. Also suits the sedimentors on all 200/300Tdi models.*** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...

Large diameter in-line fuel filter for the early EFI Range Rover Classic (up to approx. 1990). This filter has the barb hose clamp fittings. If yours has threaded fittings use ESR4065.*** Specific Brand Part *** This product is not specific to one...

Round air filter to suit the EFI Rover V8 in the Range Rover Classic from '86 to approx. '93, and the 3.5V8 Discovery 1. This filter fits the round steel air cleaner assembly. *** Specific Brand Part *** This product is not specific to one brand. If the...

Round air filter element for 200Tdi Discovery 1 up VIN JA018272. This element DOES NOT have the steel end plate. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand,...

8mm (or 5/16") olive for the fuel line connections on the 300Tdi engines. Usually needed when replacing the lift pump on the 300Tdi (used with nuts NRC9770). Two required per pump.*** Specific Brand Part *** This product is not specific to one brand...

This nut is most commonly used when replacing 300Tdi lift pumps. Two are required; as well as two olives NRC9771. These sometimes come with the lift pump, but usually not. These nuts have also been used for fuel line connections on some carburetted 3...

Small diameter inline fuel filter for all Discovery 1 V8 models, and the later Range Rover Classic models. Also fits Range Rover P38A V8 petrol models. This filter has screw in fittings; if yours has hose clamps use STC1677 *** Specific Brand Part ***...

The correct hanging type rubber exhaust mount for many Genuine Land Rover models. Easy to fit, and far superior to the cable tie you just found on the garage floor. *** Specific Brand Part *** This product is not specific to one brand. If the product...

Flat panel air filter for all Discovery 1 models from VIN MA onwards (3.9V8 and 300Tdi). Also suits the last of the Range Rover Classic with the 3.9V8.  DOES NOT fit 200Tdi or 3.5V8. OE quality Coopers or Mahle *** Specific Brand Part *** This...

Quality Coopers or Mahle fuel filter to suit all Defender and Discovery models with the 200Tdi or 300Tdi engines. Also suits the VM powered Range Rover Classic. *** Specific Brand Part *** This product is not specific to one brand. If the product photo...