Australian made King Spring to suit rear of Discovery 1 and 2. Gives a 2" lift within the normal load range. Progressive rate design.A heavy duty option is available for consistently higher loads.

The simplest and most effective front diff guard you can fit. Suits all Perentie models with the Rover front diff. Suits all Defender models to 2016. Suits all Range Rover Classic, Discovery 1 and 2, and Range Rover P38A. *** Specific Brand Part *** This...

Suits any model Land Rover with 27mm (1 1/16”) wheel nuts. Also suits the spare wheel winches n all Perentie models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

All the electrical power in the world is no good without a decent connector.  And for rough off-road conditions the humble cigarette lighter plug simply doesn't cut it.  You need a simple and reliable connector to make sure your fridge stays...

All the electrical power in the world is no good without a decent connector.  And for rough off-road conditions the humble cigarette lighter plug simply doesn't cut it.  You need a simple and reliable connector to make sure your fridge stays...

The REDARC Smart Start SBI12 100A is a 12V DC 100A microprocessor-controlled, dual battery isolator designed to protect the start battery from excessive discharge while allowing the auxiliary battery to supply charge to non-essential loads. If you own...

Suits the CES for all Perentie models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For...

As the name suggests these are a 3mm steel antenna bracket we produce for welding directly to your steel bullbar. Can be used as an antenna mount or spotlight/light bar mount. Comes in bare metal. Far superior to the "clamp-on" type - once these are...

The proper tool for undoing , adjusting and tensioning Genuine Land Rover wheel bearings. A cold chisel IS NOT a suitable replacement for this tool. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...