Nyloc nut to suit the chassis end of the front and rear trailing arms/radius arms. Suits RRC from '86, all Disco 1, all Defender/110 and 6x6. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

The stepped sway bar link bolt for the front and rear anti-roll bar. Connects the ball joint link to the sway bar with the rubber bushes 552819. Suits Defender, 110, Discovery 1 and Range Rover Classic.  Also suits the front and rear sway bar links...

The sway bar/anti-roll bar link as fitted to Defender, 110, some Perentie, Disco 1, RRC. One end of this link looks like a tie-rod end. Two per axle, and these are the same front and rear. Comes with two rubber bushes 552819 per link. *** Specific Brand...

OE Metalastik type bush for the rear upper a-frame to chassis mount. Suits the rear of all Range Rover Classic, all Discovery 1, all Defenders, and all 110 models including 4x4 Perentie. The old bushes must be pressed out and these new ones pressed in...

Original style rubber/steel bush for the diff end of the rear trailing arm. Suits most coil sprung Genuine Land Rovers - RRC, Disco 1, Defender, 110 and Perentie 4x4. *** Specific Brand Part *** This product is not specific to one brand. If the product...

Cup type shock absorber guide washer. Normally fitted to the top and bottom of the front shocks in all Defenders/110, Discovery 1, Range Rover Classic and Perenties. These are often supplied with various shock absorbers, but not always. *** Specific...

Rear swaybar (or anti-roll bar) "D" bush to suit all rear Defenders including Puma models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you...

Nominal 2" raised front spring for all Defender models from 1991 on. Suits 200/300Tdi, Td5 and Puma models.  Will also suit the front of a diesel Discovery 1 with a bullbar and winch.   A good all-round option for the front of any of...

Rear King springs for Defender or Perentie 4x4 with a consistently higher tare weight (nominally 300kg above standard tare). Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring.  Good match for...

Rear King springs for Defender 110 to 2016 or Perentie 4x4. Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring but slightly heavier.  Good match for a Defender 110 station wagon loaded for...

Shock absorber bush for 110/Defender/RRC and Disco 1. Fit front shocks upper and lower and rear shocks lower. Note: On the later models your rear axle may have cups welded to the lower shock mount. If it does you need shock bushes part number RNF100090L...