Steering and Suspension

Steering and Suspension

Sort by

Rear Upper Shock Absorber Mount, 2" Lowered

Rear Upper Shock Absorber Mount, 2" Lowered

$193.60
Fitted taller rear springs? Your rear shocks may "top out". These mounts lower the upper mount, effectively restoring 2" to your shock stroke length. Suits all Range Rover Classic, all Discovery 1, all Defenders and all 110 (including Perentie 4x4). ***...
Front Radius Arm Bush Kit (Chassis End)

Front Radius Arm Bush Kit (Chassis End)

$51.21
Over the years the quality of genuine suspension bushes has dropped to the degree we have been forced to find alternatives. We have been using this particular nylon bush for a couple of years and it has proven to be very successful in terms of...
LOCK WASHER, PITMAN ARM, 60MM

LOCK WASHER, PITMAN ARM, 60MM

$4.10
Lock tab washer for all pitman arms fitted to all power steering and manual steering boxes in the following models: Range Rover Classic, Discovery 1, 110, Perentie, Defender. *** Specific Brand Part *** This product is not specific to one brand. If the...
Rear Trailing Arm Bushes, Rubber Type, Pair

Rear Trailing Arm Bushes, Rubber Type, Pair

$69.00
Rear trailing arm to chassis bush, often known as the triangle bush due to the three mounting bolts. Suits Range Rover Classic from approx. 1985, all Discovery 1, all 110 County and Defender up to 2017. Suits Perentie 4x4. This is one pair - 2x bushes...
Power Steering Output Shaft Seal Kit

Power Steering Output Shaft Seal Kit

$28.47
Seal kit to suit the output shaft of ALL 4-bolt power steering boxes. Contains the bottom seal, spacer ring, dust seal and circlip. DOES NOT include any other seals for these boxes; for a complete seal kit see STC2847. *** Specific Brand Part *** This...
4-Bolt Power Steering Box Seal Kit

4-Bolt Power Steering Box Seal Kit

$72.00
Complete seal and o-ring kit for any 4-bolt power steering box. Includes top input and output seals, external o-rings and the piston rings and miscellaneous fittings. Corteco or German made equivalent (the good stuff). The output seal is available as a...
Tie Rod End LH Thread

Tie Rod End LH Thread

$43.00
Top quality Lemforder tie rod end with LEFT HAND thread. Fits one end of the track rod (one required per vehicle except Discovery 1 and late Range Rover Classic needs two). Fits 4x4 and 6x6 Perenties. Also fits all coil sprung Genuine Land Rovers with...
Tie Rod End RH Thread

Tie Rod End RH Thread

$43.00
Top quality Lemforder tie rod end with RIGHT HAND thread. Fits the left hand end of the drag link and one end of the track rod (two required per vehicle). Fits 4x4 and 6x6 Perenties. Also fits all coil sprung Genuine Land Rovers with live beam axles...
Defender/110 Steering Damper

Defender/110 Steering Damper

$66.72
OE quality replacement steering damper for all Defenders, all Perenties and all 110 County models. If you have a steering shimmy or shudder it is more than likely the issue is with your panhard bushes or swivel pin pre-loads. That said steering dampers...
Front Shock Tower Retaining Ring

Front Shock Tower Retaining Ring

$7.50
Retaining ring with studs for the front shock absorber tower. With some age on these rings we are now seeing a lot of failures - usually the studs either stripping or breaking off. Suits all Range Rover Classic, all Discovery One, all Defenders, all 110...
A-Frame Ball Joint (Upper Rear)

A-Frame Ball Joint (Upper Rear)

$59.60
Non-adjustable Lemforder (German) a-frame ball joint. Top quality replacement ball joint for all Range Classic, all Defender and 110 up to 2017, all Discovery 1, and all 4x4 Perentie. For an adjustable version see RHF500110ADJ. NOTE: If you buy this with...
Adjustable A-Frame Ball Joint

Adjustable A-Frame Ball Joint

$84.00
Rear A-Frame upper ADJUSTABLE ball joint fitted to the top of the rear diff. Fits all coil sprung Genuine Land Rovers with live beam axles (all 110, Defender, Range Rover Classic, Discovery 1). The locking stakes are tapped back to allow adjustment and...
Ignition/Steering Lock Clamp

Ignition/Steering Lock Clamp

$22.00
Mounting clamp for the steering/ignition lock assemblies found on pretty much all 110 and Defender models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may...
Upper Rear A-Frame Nut

Upper Rear A-Frame Nut

$3.85
Upper a-frame to chassis nut (3/4"UNF) for Range Rover Classic, Discovery 1, 110 County, Defender and 4x4 Perentie. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific...
Radius/Trailing Arm M20 Nyloc Nut

Radius/Trailing Arm M20 Nyloc Nut

$3.85
Nyloc nut to suit the chassis end of the front and rear trailing arms/radius arms. Suits RRC from '86, all Disco 1, all Defender/110 and 6x6. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...
Sway Bar Link Bolt, Stepped

Sway Bar Link Bolt, Stepped

$5.50
The stepped sway bar link bolt for the front and rear anti-roll bar. Connects the ball joint link to the sway bar with the rubber bushes 552819. Suits Defender, 110, Discovery 1 and Range Rover Classic.  Also suits the front and rear sway bar links...
Anti-Roll Bar Link/Ball Joint

Anti-Roll Bar Link/Ball Joint

$44.00
The sway bar/anti-roll bar link as fitted to Defender, 110, some Perentie, Disco 1, RRC. One end of this link looks like a tie-rod end. Two per axle, and these are the same front and rear. Comes with two rubber bushes 552819 per link. *** Specific Brand...