Overhaul kit for the STC500100 clutch master cylinder. Suits Series 3, Perentie and Defender. NOTE: If the bore of your existing cylinder is scored this kit WILL NOT fix it. *** Specific Brand Part *** This product is not specific to one brand. If the...

Suits all Perentie models. Suits all Defenders to 2016. Adaptor fitting for attaching the clutch pipe to the clutch master cylinder. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description...

Replacement cap to suit all STC500100 clutch master cylinders. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part...

Foam seal/gasket fitted between the clutch master cylinder STC500100 and the pedal tower. Suits all Defender, 110, Perentie and some Series models. Anything that uses the STC500100 master cylinder. *** Specific Brand Part *** This product is not specific...

If your budget is limited this is the clutch master cylinder for you. Suits all Series 3, all Defenders and all 110 (including Perentie 4x4 and 6x6). We generally recommend replacing the slave cylinder at the same time; it does the same amount of work as...

Clutch master cylinder to suit all Series 3, Defender/110 and all Perentie models. These do fail over time, and should be replaced by a good quality name-brand unit. We use PBR or TRW (as supplied here). There are plenty of cheap ones out there; we...

Pedal rubber pad to suit all 110/Perentie/Defender from approximately 1984 on. This is the slip on type and does not have the metal tabs. Fits clutch and brake pedals. *** Specific Brand Part *** This product is not specific to one brand. If the product...

New control valve required for the slave cylinder LR068979 on the Puma Defender. You also need the adaptor LR068981 to match this. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists...

Adaptor required with slave cylinder LR068979. You will also need LR068982 *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or...

We recommend replacing this when you do a clutch on the Puma Defenders. Suits 2.4 and 2.2 models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide...

The pedal assist spring kit fitted to Genuine Land Rover Defender from about 1992 onwards. This will not fit the Perentie or 110 clutch pedal. Includes the return spring and the two plastic locating inserts. *** Specific Brand Part *** This product is...