The correct hanging type rubber exhaust mount for many Genuine Land Rover models. Easy to fit, and far superior to the cable tie you just found on the garage floor. *** Specific Brand Part *** This product is not specific to one brand. If the product...

The pedal assist spring kit fitted to Genuine Land Rover Defender from about 1992 onwards. This will not fit the Perentie or 110 clutch pedal. Includes the return spring and the two plastic locating inserts. *** Specific Brand Part *** This product is...

NOW WITH 0MM OFFSET!! The heavy duty rim for the Defender 130 models had become known as the "Wolf" rim after a British military version of the Defender. These rims are 16"x 6.5" and now come with 0mm offset. They are an excellent replacement for the...

3/8"UNF propshaft bolt - used at the front and rear diff pinion flange. Suits all Range Rover Classic and P38A; all Defender, 110 and Perentie; all Discovery 1 and 2.*** Specific Brand Part *** This product is not specific to one brand. If the product...

Diff filler and drain plug for many, many Genuine Land Rover models. This is the taper BSP thread type that accepts a standard 1/2" drive ratchet/breaker bar. Also suits LT230 transfer cases. This one DOES NOT have a magnet. *** Specific Brand Part ***...

TIMKEN Bottom swivel bearing for all 110/Defender up to KA (approx. '93) and Defender Puma. Also suits all Perentie 4x4 and 6x6. Also suits all ABS equipped Defenders (bottom bearing only). Top and bottom swivel bearing for all Range Rover Classic and...

The proper tool for undoing , adjusting and tensioning Genuine Land Rover wheel bearings. A cold chisel IS NOT a suitable replacement for this tool. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...

O-ring to seal the speedo drive insert into the rear output housing. Suits LT95 and LT230. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you...

Outer (small) diff pinion bearing for the Rover-type diff to front and rear of all Range Classic; all Discovery 1 and 2, all Defender/110/Perentie (front only). DOES NOT fit the P38A or rear Defender from approx. '02 on. *** Specific Brand Part *** This...

Inner (large) diff pinion bearing for the Rover-type diff to suit front and rear of all Range Classic; all Discovery 1 and 2, all Defender/110/Perentie (front only). DOES NOT fit the P38A or rear Defender from approx. '02 on. *** Specific Brand Part ***...