Suits any model Land Rover with 27mm (1 1/16”) wheel nuts. Also suits the spare wheel winches n all Perentie models. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a...

All the electrical power in the world is no good without a decent connector.  And for rough off-road conditions the humble cigarette lighter plug simply doesn't cut it.  You need a simple and reliable connector to make sure your fridge stays...

All the electrical power in the world is no good without a decent connector.  And for rough off-road conditions the humble cigarette lighter plug simply doesn't cut it.  You need a simple and reliable connector to make sure your fridge stays...

A must have tool for DIY Land Rover mechanics.  The correct size (9/16") slimline socket especially designed for Land Rover propshaft nuts.  3/8" drive.  Can be used with impact tools. NOTE: LAND ROVER PROPSHAFT NUTS ARE NOT...

Complete Superflex suspension kit.  We have done all of the hard work for you - we’ve combined our own highly sought after KLR Super-Flex springs with one of the best shocks you can lay your hands on that has been specifically designed for our...

The KLR-7167 Superflex rear springs are a progressive rate, taper-wound, long travel game changer for your Land Rover.  Suitable for all 4x4 Perenties and any Defender or 110 except the 90 models, these springs are only available from KLR and...

The KLR-4177 Superflex front springs are a progressive rate, taper-wound, long travel game changer for your Land Rover.  Suitable for all 4x4 Perenties and any Defender or 110 except the 90 models, these springs are only available from KLR and...

Nominal 2" raised front spring for all Defender models from 1991 on. Suits 200/300Tdi, Td5 and Puma models.  Will also suit the front of a diesel Discovery 1 with a bullbar and winch.   A good all-round option for the front of any of these...

Rear King springs for Defender or Perentie 4x4 with a consistently higher tare weight (nominally 300kg above standard tare). Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring.  Good match for...

Rear King springs for Defender 110 to 2016 or Perentie 4x4. Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring but slightly heavier.  Good match for a Defender 110 station wagon loaded for...

The proper tool for undoing , adjusting and tensioning Genuine Land Rover wheel bearings. A cold chisel IS NOT a suitable replacement for this tool. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the...