One-piece upper rear shock absorber bush for Range Rover classic, Discovery 1, Defender and Perentie models. This bush has a steel insert in the middle. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or...

Nominal 2" raised front spring for all Defender models from 1991 on. Suits 200/300Tdi, Td5 and Puma models.  Will also suit the front of a diesel Discovery 1 with a bullbar and winch.   A good all-round option for the front of any of...

Rear King springs for Defender or Perentie 4x4 with a consistently higher tare weight (nominally 300kg above standard tare). Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring.  Good match for...

Rear King springs for Defender 110 to 2016 or Perentie 4x4. Lifts roughly 2" above STANDARD height; closely matches the height of the original 4x4 Perentie rear spring but slightly heavier.  Good match for a Defender 110 station wagon loaded for...

Upper a-frame to chassis bolts for Range Rover Classic, Discovery 1, 110 County, Defender and 4x4 Perentie. *** Specific Brand Part *** This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we...

Replacement bolt for the NTC1772 bush on the rear of most coil sprung/live-beam axle Genuine Land Rovers. Connects the rear trailing arm to the rear diff. 2x per vehicle. These often end up with a shoulder worn into them from coming loose. Check the...

Shock absorber bush for 110/Defender/RRC and Disco 1. Fit front shocks upper and lower and rear shocks lower. Note: On the later models your rear axle may have cups welded to the lower shock mount. If it does you need shock bushes part number RNF100090L...

Two long bolts to secure the a-frame ball joint assembly to the rear a-frame arms (just above the rear diff). Suits Range Rover Classic, Discovery 1, 110 County, Defender and 4x4 Perentie. The nuts for these bolts are 1/2"UNF  - see NY608042...